Patch Pvc Car Rubber Mat Making Silicone Phone Cover Molding Machine With Cheap Prices

Patch Pvc Car Rubber Mat Making Silicone Phone Cover Molding Machine With Cheap Prices

Cheap Dispenser FAQ
glue blockage
This situation is mainly due to excessive moisture or reused instant glue. Make sure to use fresh instant glue. The tubing was thoroughly cleaned with moisture-free Aceton acetone. The air used should be determined to be dry and a filter should be installed between the air pressure and the valve system in the factory. (If the above method still does not work, nitrogen should be used).
Reasons for glue breakage during dispensing
First: Check whether there is a problem with the glue (such as bubbles in the glue, particle deposits, etc.), in this case, the glue dispenser will have a problem of glue breaking;
Second: Whether the dispensing controller is working properly, because of its abnormal operation or its own lack of performance, there will also be a problem of dispensing and glue breaking.
UV glue
UV glue is ultraviolet curing glue.
Be sure to use black tubing.
Do not directly add UV glue to the old UV glue of the pressure cylinder. First let off the original UV glue, and then pour the UV glue into the empty pressure cylinder. The UV glue in the pressure cylinder often produces bubbles after a period of time, which causes the glue to be unstable.